Tiva C Series EK-TM4C123GXL LaunchPad Boad

Tiva C Series EK-TM4C123GXL LaunchPad Boad

Description

The TM4C123G LaunchPad Evaluation Kit is a low-cost evaluation platform for ARM Cortex-M4F based microcontrollers from Texas Instruments. The design of the TM4C123G LaunchPad highlights the TM4C123GH6PM microcontroller with a USB 2.0 device interface and hibernation module.

The EK-TM4C123GXL also features programmable user buttons and an RGB LED for custom applications. The stackable headers of the TM4C123G LaunchPad BoosterPack™ XL Interface make it easy and simple to expand the functionality of the TM4C123G LaunchPad when interfacing to other peripherals with Texas Instruments MCU BoosterPack.

Features

The ARM Cortex-M4F Based MCU TM4C123G LaunchPad Evaluation Kit (EK-TM4C123GXL) offers these features:

• High Performance TM4C123GH6PM MCU:
  1. 80MHz 32-bit ARM Cortex-M4F CPU
  2. 256KB Flash, 32KB SRAM, 2KB EEPROM
  3. Two Controller Area Network (CAN) modules
  4. Dual 12-bit 2MSPS ADCs, motion control PWMs
  5. 8 UART, 6 I2C, 4 SPI
• On-board In-Circuit Debug Interface (ICDI)
• USB Micro-B plug to USB-A plug cable
• Preloaded RGB quick-start application
• Tiva C Series TM4C123G LaunchPad — Readme First

Tiva C Series TM4C123G LaunchPad Evaluation Board

Switch and LED interface

• PC0-PC3 is used for JTAG connections to the debugger on the LaunchPad.
• The LaunchPad connects PB6 to PD0, and PB7 to PD1.
• If you wish to use both PB6 and PD0 you will need to remove the R9 resistor.
• Similarly, to use both PB7 and PD1 remove the R10 resistor

Interface connectors

References

1. Tiva C Series TM4C123G LaunchPad — Readme First
2. Tiva C Series TM4C123G LaunchPad Evaluation Kit — User’s Manual
3. TM4C123GH6PM Microcontroller — Data Sheet